Install Guide

Terms and Conditions
Once you have read the Safety Notices and Terms & Conditions by clicking on the
orange text in the middle of the screen, please tick the box and click “Continue”.
4
Register your kit
The Hub ID can be found on the back of the hub, below the power and ethernet
sockets. The three letters need to be entered in the rst box, and the three numbers
in the second.
When you have done this click “Submit”.
5
Connecting your hub
You now need to connect your hub to your broadband router and to the mains
power, as shown.
Once you have done this click “Continue”.
6
Choose your PIN
You need to choose a 4 digit PIN (for example 1234) to allow you to control the
system remotely.
Please enter your chosen number in both boxes, and then click “Save”.
7
45
67