User Manual

I can't see a flashing light on it
The light, when flashing, is in the position of the green dot here:
When you first put the battery in, you should expect to see the Keyfob light blink twice every few seconds; the
light will go out once the Keyfob is communicating with the Hub. The light will come on again when this Keyfob
is selected for naming on the website. If you aren't naming this Keyfob, it most likely will not be flashing its
light.
What does the flashing light mean whilst I'm naming it?
When this Keyfob is selected for naming on the website it will flash regularly once a second (whilst it is in a
good position to be used), or it will blink twice every few seconds (if it is not in a good position, and cannot
communicate with the Hub).
What does the flashing light mean when I'm testing it?
Once you have installed your Keyfob, the light will go out for the remainder of the Alertme setup process.
When you reach the testing stage, the light will come on whenever either Keyfob button is pressed. For more
information about testing, click here.
What is the little thingy in the box with my Keyfob?
In some cases you may find a small plastic bag inside the Keyfob box, which contains a little metal tag. This tag
can be used to open the Keyfob (just insert the small end into the slot in the Keyfob, and twist the tag). If the
tag is big enough, you may wish to use it on the Keyfob keyring, writing on it to label which Keyfob this is.
(There are two versions of the tag - tiny, and bigger!) If you have a trial/beta version of AlertMe, then you
probably won't find one.