User guide

TALKSWITCH CONFIGURATION 64
Hunt group permissions
The Hunt Group Permissions area allows you to select the hunt groups that the extension can
use. You can restrict an extension’s access to specific hunt groups. Each extension has access to
all hunt groups by default.
1. Click Additional Settings. The Additional Settings window appears.
2. Select the Hunt Group Permissions tab.
3. Set the checkboxes in the Hunt Group Permissions area to control access to the hunt groups.
Select a checkbox to grant access to the hunt group, or clear the checkbox to remove access.
4. If 3-Way Calling/Conference is selected in the Telephone Lines page, you can select the
Allow the use of same line connect (by dialing 80) checkbox. If this is selected, the user can
transfer a call to a remote extension using the same telephone line that the caller is on. The
user dials Flash or Recall, remote extension, and then Flash 4 or Recall 4. The telephone
company puts the caller on hold, and the TalkSwitch system uses the same telephone line to
try the remote extension.