User guide

TALKSWITCH CONFIGURATION 60
2. If you set Location to External, select the Time zone that matches the location of the
IP phone.
3. Use one of the procedures below to identify the IP phone, depending on the make
and model.
TalkSwitch TS-550i, TS-480i, TS350i, TS-9133i or TS-9112i
1. Set the MAC address of the phone:
•The MAC address will be complete, if you connected a phone to the LAN and used it to
select the extension number. See Connecting the TalkSwitch IP phone to the network on
page 85.
• You can select the MAC address from a list of automatically-detected phones connected
to your LAN. This method is also available if you programmed the phone as an external
IP extension (see Programming the TalkSwitch IP phone as an external IP extension on
page 94). To use this method:
i) Click the Select button. A MAC Selection window appears and lists TalkSwitch IP
phones of the selected type. If a phone has already been assigned to an extension,
Ext Assignment shows the extension number, first name and last name. If a phone
can be assigned to the extension, Ext Assignment shows Available.
ii) Select the MAC address of the IP phone associated to the extension, and then
click Select.
• You can enter the MAC address manually. The MAC address is printed on the bottom of
the phone and on the phone’s shipping box.
2. If the Type of phone is TalkSwitch TS-550i, TS-480i, TS-350i or TS-9133i, click Configure Keys
to set up the programmable keys. See Programming TS-9133i function keys on page 93,
Programming TS-480i softkeys on page 94, Programming TS-550i function keys on page 88, or
Programming TS-350i function keys on page 87.
3. Choose File > Save. The system will create a configuration file that the phone will download
when the phone is restarted.