User guide

TALKSWITCH CONFIGURATION 52
3. Click the Update configuration button. The essential settings for communication with the
service provider’s registration servier will be completed automatically.
4. If you want to customize other aspects of your VoIP lines, you may do so in the System VoIP
Options area. See System VoIP options on page 49.
Account-specific and number-specific settings are not automatically configured. These must
be entered on the VoIP Numbers page.
Manual configuration
1. Select the Activate Profile checkbox.
2. Enter the Profile name. The default profile name is Service provider n (e.g. Service provider 1).
3. If your service provider requires you to register using your private IP address, select the
Disable public IP address substitution checkbox. Check with your service provider.
4. Some providers require the TalkSwitch system to register using the username or account
information rather than the VoIP number(s) provided. If so, check the Register with
authentication username box to have TalkSwitch register with the username information
provided in the VoIP numbers page. Check with your VoIP service provider if you're
uncertain which method of registration is required
5. If your service provider requires keep alive messages, and if your router does not support
uPNP, check the Enable NAT keep alives checkbox.
a) Click Settings. The Keep Alive Settings window appears.
b) Select the method used to keep ports open. Choices are: