User guide

TALKSWITCH CONFIGURATION 26
• The model numbers of the TalkSwitch units in the TalkSwitch system. Clicking the My
TalkSwitch system link displays the Talkswitch Network window. It shows the MAC
address, IP address, model number, firmware version, and length of operation for each
TalkSwitch unit.
To identify a TalkSwitch unit, click the Identify button. The Identify button will change to
a Stop button. All the lights on the front panel will start flashing. Click the Stop button to
end the flashing.
• The number of new voicemail messages in the TalkSwitch system, and the total number of
voicemail messages. Clicking the Voicemail messages link displays the Voicemail Memory
Usage window. It shows message statistics for each voice mailbox. See View mailbox data on
page 125.
• The version number of the TalkSwitch management software.
• When the configuration was last saved to the TalkSwitch system.
• The type of connection to the TalkSwitch system.
• The region of the TalkSwitch system.
ADMINISTRATION
The Administration page allows you to set up the system name, system password,
region,language, and how to route the call if a user dials an operator number.