User guide

TALKSWITCH INSTALLATION 12
Connecting a single-line analog phone
This is the basic, simple set-up. All functionality including transferring calls, forwarding calls
and voicemail, is handled by the unit. Even the most basic of phones, once connected, will
inherit these functions.
Each phone is connected to an extension jack. Calls on extension 111 ring the phone connected
to jack E1. Calls on extension 112 ring the phone connected to jack E2 and so on.
Figure 7: Single-line phones
Connecting a two-line analog phone
You can plug a two-line phone into two extension jacks of the TalkSwitch unit. You can then
configure each telephone line to ring a specific extension. For example, line 1 can ring
extension 111, which will show Line 1 as active. Line 2 can ring extension 112, which will show
Line 2 as active and so on.
Figure 8 shows extensions 111 and 112 connected to a two-line phone that uses separate jacks
for each line.
Figure 8: Two-line phone