User guide

EXTENSION NUMBERS, FUNCTIONS AND COMMANDS 264
0 (9 in some regions) Dials the receptionist.
*0 External PA access to make an announcement through the
attached external PA system.
*300–399 Dials the system speed dial number.
Flash or Recall/Hold 5 Disconnects the current caller and reconnects to the last caller on
hold. A conference-call initiator can disengage the second
conferenced party by pressing Flash 5 or Recall 5.
Flash or Recall/Hold
*500–509
Press Flash or Recall/Hold to place a call on hold and then press
*500–509 to place the call in one of ten park orbits.
Flash or Recall/Hold *510 Press Flash or Recall/Hold to place a call on hold and then press
*510 to place the call in the next available park orbit, starting at
500.
**500–509 Retrieves a parked call.
Flash or Recall/Hold 6 Conference call for 3 parties. Press Flash or Recall to put the first
caller on hold, dial another extension or external number and
press Flash 6 or Recall 6.
*56 TalkSwitch unit will announce its IP address.
*60
*61
*62
Disables Do Not Disturb at the current extension.
Enables Do Not Disturb at the current extension.
Toggles Do Not Disturb at the current extension.
*7 and extension Call pick-up at a specific extension. Dial from dial tone to pick up
a call ringing at another extension.
Flash or Recall/Hold 7 Press Flash 7 or Recall 7 to cycle through queued calls on a first
in/first out basis.
80 Accesses Same Line Connect when transferring an outside caller to
another outside number.
9 (0 in some regions),
81–88
Dial to access an outside line.
On an IP extension, press Dial, Send or # after your entry for the following options:
*80 Play music on hold from an internal .wav file or an external audio
source through the PA jack. If music on hold is playing through
the PA jack, and a user dials *0 to make an overhead page, the
overhead page will interrupt the music on hold. However, if the
PA jack is configured to perform voicemail screening, and a user
or caller accesses a voice mailbox, music on hold will not
be interrupted.
*810# Display the alternate name instead of the caller ID name.
*81 [1–10] # Route future calls from the last caller according to the
specified group.
*81255# Delete the last caller from the caller ID lookup list.
*84 and extension Hands-free intercom call to an extension, automatically answered
in speaker mode, enabling instant hands-free 2-way
communication (for supported sets).
*85 and extension or ring
group number
Page a phone at an extension or the phones of a ring group.
*88 and account code Attach account code to call detail record (CDR) for last call.