User guide
TALKSWITCH CONFIGURATION 197
You can also enter the IP address of the desired TalkSwitch unit in the IP field in the Explicit
Connection area. Specify the Port if necessary. The default port is 9393.
d) Use the checkboxes to select the line(s) you want to optimize for each unit, and click
Calibrate…
e) You will be prompted to allow a reboot of your TalkSwitch system. Click Yes.
As your TalkSwitch system reboots and proceeds with optimization, the Line Optimizer
displays progress information.
f) When the program reports Calibration Finished, you can perform another calibration or
exit the Line Optimizer.
4. For each telephone line, set the transmit level to callers. This affects the volume for remote
callers, not internal users. Choices are:
• Louder
•Default
•Quieter
CAUTION: Calibrating the telephone lines, and then overriding the outbound volume level can
degrade system performance.