User guide

TALKSWITCH CONFIGURATION 196
3. Select one of the calibration methods by clicking one of the radio buttons at left and click
Proceed to continue.
QUICK method
a) A Quick Calibration window will appear. Use the pull-down menu to select the lines to
calibrate, and click Run Calibration. The software displays progress information
throughout the calibration.
b) When Test Complete appears, click Close.
OPTIMIZED method
a) You will be prompted to terminate your TalkSwitch configuration session before
launching the TalkSwitch Line Optimizer program.
b) The TalkSwitch Line Optimizer should launch upon exit of the management software.
You can also launch this program from the start menu: Programs > TalkSwitch 6.12 > Line
Optimizer.
TalkSwitch Line Optimizer
c) The TalkSwitch Line Optimizer program automatically discovers TalkSwitch units on the
same LAN that your PC is connected to. Use the pull-down menu to select the unit you
want to optimize lines for. Click Connect.
The OPTIMIZED method requires that your PC and your TalkSwitch unit(s) be on the same LAN.
If Windows provides a security alert when launching the Line Optimizer program, click Ignore
or Unblock to proceed.