User guide

TALKSWITCH CONFIGURATION 190
1. Choose Options > Internal Calls. The Intercom Calls Options window appears.
2. Select the Intercom calls follow cascade settings checkbox to have an intercom call use the
call cascade of the dialed extension. Otherwise the intercom call will ring continuously.
Call Back
The Call Back command allows you to set the number of rings the TalkSwitch unit will allow
before hanging up, during an auto call back or prompted call back.
1. Choose Options > Call Back. The Call Back Options window appears.
2. Select the number of rings the TalkSwitch unit will allow during a call back before hanging
up. Choices range from 1 ring to 9 rings.
Set Date & Time
The Set Date & Time command allows you to set the time, date, time zone, and NTP server. See
System time on page 31.
TROUBLESHOOTING MENU
The Troubleshooting menu allows access to diagnostics and advanced settings. Do not adjust
these settings unless advised to do so by your local dealer or technical support centre. The
default settings provide correct operation with telephone lines and analogue extensions.
Auto Attendants
The Auto Attendants command allows you to set auto attendant timers.