User guide

TALKSWITCH CONFIGURATION 182
Call Logging Output (CDR)
The Call Logging Output (CDR) command allows you to set up logging of call detail records. For
information about call logging, see Enabling call detail record logging on page 226.
Defaults > Entire Configuration
The Defaults > Entire Configuration command resets the entire configuration to defaultvalues.
Defaults > Current Page
The Defaults > Current Page command resets the current page of the configuration to
default values.
Check for Updates
The Check for Updates command looks for updates to the firmware or TalkSwitch management
software on the TalkSwitch website.
Update Firmware
The Update Firmware command shows the firmware version of the TalkSwitch units and the
latest firmware version available with the TalkSwitch management software. It allows you to
update the TalkSwitch units with a newer firmware version.
1. Choose Tools > Update Firmware. The TalkSwitch Firmware Update window appears.
2. If the Firmware detected is lower than the Firmware file:
a) Set the Auto-Reboot checkbox.
•Select Auto-Reboot to automatically reboot the TalkSwitch units once the firmware
has been updated. This will cancel any calls in progress.
•Clear Auto-Reboot to prevent the TalkSwitch units from rebooting automatically. You
will have to manually reboot the TalkSwitch units later, when there are no calls in
progress. See Reboot TalkSwitch on page 183.
b) Click the Update button.