User guide

TALKSWITCH CONFIGURATION 79
1. Press to enter command mode. Enter the password if required.
2. Enter the appropriate command as listed below. After each command,
press to confirm the entry.
Allow Call Bridge:
To allow Call Bridge when a Call Back is accepted, check the Allow Call
Bridge box. You can restrict the Call Bridge line access by clicking the
Hunt Group Access button. By default, Call Bridge is enabled when Call
Back is activated.
To record message: 65
To playback message: 75
Note: The call back number shown is always the last number TalkSwitch
dials in the last Prompted Call Back session.
2.3.6.3 Call Bridge
#
#