User guide

TALKSWITCH CONFIGURATION 51
Load Greeting (button):
You can load a pre-recorded voicemail greeting from your PC to TalkSwitch.
The file must be an 8khz, 8-bit, mono µ-law .wav file.
In the Voicemail Notification Settings section
Under the Dialed Notification tab, set the manner in which you want to be
notified when new messages arrive.
Remote Phone:
If you want to be notified at another location when new messages arrive,
use Remote Phone Notification. Enter the phone number of the cell
phone or location where you want to be notified.
Notification Settings (button):
Select Notification Settings to specify how you want TalkSwitch to
handle notification calls.
Pager:
Click the Pager check box if you want to be notified by pager when new
messages arrive. Activate the feature and enter the pager number and the
numeric message to be displayed on the pager.
Configuration Notification Options (button)
Define how TalkSwitch dials out of your office when notifying you of a
voicemail. If the first connection is not successful, define the number of
times and the intervals TalkSwitch continues to attempt the connection.
When you choose to be notified by pager and remote phone, TalkSwitch
ensures that both locations have been contacted before finishing the
notification process.
go to auto attendant Callers are transferred to the specified
Auto Attendant.
perform no action No action is performed when ‘0’ is pressed.