User guide

TALKSWITCH CONFIGURATION 45
Remote Extension number. There are 8 Remote Extensions available per
TalkSwitch unit.
Choose a Remote Extension to configure. You must enter a phone number in
order for the extension to be considered active by the system.
Last Name/First Name:
Enter the first and last name of the person associated to the extension.
The last name is required if the person is to be included in the ‘Dial by
Name’ directory listing used by the Auto Attendant. The person using
that extension must also record their name for the directory following
the instructions listed below the name fields.
Forwarding Information
Remote phone number:
Enter the phone number of the Remote Extension (no specific prefixes
are required other than area codes for long-distance calls). Enter the
number the same way you are dialing it from a regular phone. You may
use digits 0–9, space, comma, dash, and .
Note: If a TalkSwitch has Unit ID 2, the Remote Extension numbers are
221–228. Unit ID 3 has remote extensions 231-238 and Unit ID 4 has
241-249.
#
*