User guide

34 TALKSWITCH USER GUIDE • NORTH AMERICA
Select a Line Hunt Group and enter a unique name to identify this Hunt
Group elsewhere in the configuration software.
Under ‘Set Line Hunt Group’, select the Line Type. If you wish to use this
Hunt Group to access telephone lines, select ‘Phone Lines’. To use this Hunt
Group to access VoIP numbers, select ‘VoIP numbers’.
Under ‘Set Line Hunt Group’, select the lines you wish to add to the Hunt
Group by checking the box next to the line.
Hunt Group 83: selects telephone Line 3
Hunt Group 84: selects telephone Line 4
Hunt Group 88: selects any available VoIP number (only applies
when a 48-CVA is present on the LAN)
Note: Hunt Groups 83 and 84 only apply to 48 models.
Note: If multiple TalkSwitch units are connected to the LAN,
a check box is enabled, so that outbound calls always hunt
the lines on the unit where the extension is connected. This
minimizes network traffic between units.