User guide

TALKSWITCH CONFIGURATION 21
2.3.3.2 IP Configuration
Configure TalkSwitch IP settings:
Click on System information (to expand)
Click IP Configuration.
The Radio button “Obtain IP and DNS information automatically” is selected.
System IP Settings section
If you have a DHCP (Dynamic Host Configuration Protocol) server and your
TalkSwitch unit(s) is (are) connected to the LAN, all fields are filled with the
correct information.
Note: If the administrator forgets the password, the only option to gain
access to the configuration settings is to contact TalkSwitch Technical
Support.
In order for the TalkSwitch 48-CVA to function properly, an IP address and
other pertinent information is required. If you have a TalkSwitch 48-CA,
this information is only required to configure the system remotely or to
network it with a CVA on a LAN. There are two methods of configuring the
IP settings, automatic and manual.