User guide

142 TALKSWITCH USER GUIDE • NORTH AMERICA
DTMF dialed from a Local Extension
90 Set to Serial connection mode (default)
91 Set to USB connection mode
2xx 8<phone
number>
Enter Remote ext. (2xx) phone number
2xx 980 0 Enter Remote ext. (2xx) Turn off “Same Line Connect”
2xx 980 1 Enter Remote ext. (2xx) Turn on “Same Line Connect”
2xx 9 <Hunt
Group>
Enter Remote ext. (2xx) “Connect using:” Hunt Group
(Hunt Group = 9, 81–88)
1xx 61 Enable ‘Do not Disturb’ at the Local Extension
1xx 60 Disable ‘Do not Disturb’ at the Local Extension
Command Function performed Notes
111–114 Intercoms a Local Exten-
sion
D i r e c t d i a l f r o m d i a l t o n e ;
211–218 Dials a Remote Extension
(associated with an exter-
nal phone number).
Direct dial from internal
dialtone;
300–309 Dials an Extension Ring
Group. 10 in total for the
entire system. Mapped to
local extension(s), with
specific fall through
options.
Direct dial from internal
dialtone;
<flash> if
connected
to a caller
Puts caller on hold. After putting a caller on
hold, you receive internal
dialtone;