User guide

220 TALKSWITCH USER GUIDE • NORTH AMERICA
1. Use dual-line phone cable to connect from the demarcation point to
TalkSwitch. You will need to purchase the dual-line phone cable
(available at most hardware stores) or wire it and crimp it yourself. Do
not use the supplied RJ-11 cable as it is only a single-line cable.
2. Use the single-line RJ-11 phone cord supplied with TalkSwitch to connect
from the TalkSwitch extension to the extension block.
3. Connect the office phones to the TalkSwitch using RJ-11 cabling supplied
with TalkSwitch or the cables supplied with your phone.