User guide

A D D I N G I P P H O N E S T O T A L K S W I T C H 1 1
c) Press the down arrow key on the TS-9112i or TS-9133i, or press the Enter softkey on the
TS-480i. The phone displays the following prompt.
If you have not entered a valid available extension number, the phone returns to step a.
d) Press the down arrow key on the TS-9112i or TS-9133i, or press the Reboot softkey on
the TS-480i. The phone reboots, and then displays the date, time, extension number, and
number of voicemails (if any). The phone is available for use, but you can configure
additional features with the TalkSwitch management software.
Adding the extension to the TalkSwitch system
1. Launch the TalkSwitch management software.
2. Select the Local Extensions/Fax page.
3. Select an available extension number.
4. Select the Extension tab.
Activate extension area
If you connected a TalkSwitch TS-9112i, TS-9133i or TS-480i IP phone to the LAN and used it to
select an extension number, the Extension type and Type of phone will already be assigned and
displayed. In this case you will enter the First name and Last name, and will select the System
prompt language.
1. Ensure the Activate extension check box is selected.
2. If necessary, set the Extension type to IP extension.
3. Enter the user’s First name and Last name. The names are used for caller ID, and appear
within other pages of the TalkSwitch management software. The Last name is used with the
dial-by-name directory.
4. If necessary, select TalkSwitch as the Type of phone, and then select the model.
5. Select the language for prompts heard by the user of the extension in the System prompt
language list.
TS-9112i TS-9133i TS-480i
Done! Reboot Now
^=Cancel v=Enter
Done! Reboot Now
^=Cancel v=Enter
Success!
Reboot the phone