User guide

78 TALKSWITCH USER GUIDE
E-mail Server Settings section
Figure 69: E-mail server settings
In order to send e-mail notifications, the system must be programmed with
e-mail account information from your Internet Service Provider (ISP) or
administrator. If using MS Exchange for e-mail, there are cases when
notification may not work properly if certain security features are enabled.
2. Enter the name of your Outgoing e-mail server (SMTP).
Example: mail.mymailserver.com
3. Enter an e-mail address in the From E-mail address field. When e-mail
notifications arrive from the system, this e-mail address will show up in
the From field.
4. Enter an e-mail address in the Reply E-mail address field if you want
responses to be handled by someone like an administrator.
Example: [e-mail]. If you leave the field empty,
the system will use the e-mail address entered in the From field.
5. Click More Settings to enter the parameters for server authentication.
Figure 70: More e-mail settings
6. If you wish to verify your settings, click Test Account Settings.