User guide

74 TALKSWITCH USER GUIDE
Dial notification phone number using:
Select the hunt group you want to use for the remote phone and pager
notification calls. You can also adjust the number of rings before it aborts
the attempt and follows the parameters listed in the next section.
If attempt unsuccessful, try again:
These parameters control how many times TalkSwitch tries to notify the
remote phone or pager before it aborts the notification attempt. You can
specify the time interval between attempts.
2.3.2.2 Message waiting light
You can set a message waiting light to indicate when a message has been
received by an extension. Select the local extensions in your system where
you want the light to flash when a message arrives.
You can configure this feature for each mailbox.
1. Click on the Message Waiting Light tab.
2. Click Edit to select the extensions to notify when new messages arrive in
a mailbox. The Voicemail Extension Indicators window opens. By default,
the message waiting light turns on at the extension associated with a
local mailbox when a message is received.
3. Click the checkbox next to the extensions to notify when new messages
arrive in a mailbox.
4. Click on OK when done.
Figure 64: Extension indicators