User guide

TALKSWITCH CONFIGURATION 53
Figure 42: Dedicated fax line
1. Open the TalkSwitch configuration software.
2. Select System Information -> Fax Information.
3. In the Dedicated fax line section, select the fax number from the
drop-down list next to Fax number:.
4. In the Fax extension section, select the extension number where your
fax is connected.
5. Save settings to TalkSwitch.
Example: If your fax machine is connected to E8 on the rear of unit 1, select
extension number 118 for units with 8 extension jacks or 113 for units with
4 extension jacks. If your fax machine is connected to E8 on a unit with Unit
ID 2, the fax extension number is 128.
Figure 43: Fax information