User guide

TALKSWITCH CONFIGURATION 51
Emergency Service Access
Ensure that Line Hunt Group is set-up to allow access to telephone lines
with access to emergency services.
ARS Inter Digit Time-Out
ARS and Toll Restriction are implemented on each call when the longest
matching entry is found in the ARS table or after an inter-digit time-out
period. The default inter-digit time-out is set to 3-seconds. If it is necessary
to change the inter-digit time-out:
1. Open the TalkSwitch Configuration program.
2. Select Options -> Troubleshooting.
3. Select the required time-out period from the pull-down menu of options
on the ARS Interdigit time-out field.
Regulatory Advisory Notice
2.2.6 Fax information
TalkSwitch provides you with different options to configure your office for
fax calls. The advantages and disadvantages of each option are described
below, so that you can choose the best solution for your office.
Password Protection
It is recommend that the administrator password protection is enabled
when ARS or Toll Restriction are used. Enable the password protection in
the TalkSwitch configuration software under System Information ->
Administration and enter a 4- to 8-digit numeric password.
Change Password Frequently
Change the administrator password frequently to prevent unauthorized
changes to ARS or Toll Restriction,
Call Redirection & Service Provider Billing Advisory
Use of the Automatic Route Selection, Toll Restriction and Call Detail
Recording features does not imply any guarantee whatsoever by
regulatory authorities, your telephone service provider(s), TalkSwitch or
its distributors and resellers, with regard to the accuracy of these
features and that the use of such a features may not be considered by a
telephone company in any disputes which may arise regarding the
accuracy of any subscriber's telephone account.