User guide

TALKSWITCH CONFIGURATION 45
4. If the hunt group uses phone lines:
a) Click the checkbox(es) next to the line(s) you wish to add to the hunt
group.
b) The order of Line use can be adjusted to suit your needs. By default,
TalkSwitch will first search higher line numbers (e.g. Line 4) for
outgoing calls, since lower Line numbers may be more heavily used
for incoming calls. The sequence can be adjusted by selecting each
Line in the Set Line Hunt Group list, and clicking the Move Up or Move
Down buttons on the right side of the window.
Figure 40: Hunt group configuration
2.2.5 Automatic Route Selection and Toll Restriction
What is Automatic Route Selection (ARS)?
ARS directs selected outgoing calls to specific telephone lines, alternative
carriers, or VoIP trunks, for least cost routing.
What is Toll Restriction?
Toll Restriction blocks selected outgoing calls.
The ARS and Toll Restriction features offer extensive flexibility to control
the routing and blocking of calls.