User guide

TALKSWITCH CONFIGURATION 39
3. After entering, changing or deleting a password,
click File -> Save settings to TalkSwitch or click the middle icon in the
tool bar to save the settings.
Figure 35: Save settings
New settings must be saved to the
TalkSwitch phone system to take effect.
A progress bar will show the data
exchange to the TalkSwitch unit.
It takes only a few seconds to
complete.
2.2.2 IP Configuration
System IP Settings section
The Obtain IP and DNS information automatically radio option is selected by
default. This selection refers to DHCP (Dynamic Host Configuration Protocol).
If you are on a DHCP server, the IP and DNS information will be filled in
automatically.
1. Click the next to System Information -> IP Configuration.
Figure 36: Automatic IP configuration
Additional VoIP configuration information is contained throughout this
guide. For more information, see 5.4 VoIP Configuration on page 168.