User guide

TALKSWITCH CONFIGURATION 37
2.2 SYSTEM INFORMATION
2.2.1 Administration
For security reasons, we recommend that you use password protection at the
administrator level. The password is entered at configuration start-up and
when you access the configuration through an extension phone.
To activate the use of a system password:
1. Click the next to System Information -> Administration.
Figure 32: Username and password
2. If you have units in different locations, we recommend that you assign a
system name to each unit for tracking purposes. Enter a name in the
System Name field. The system name will also be required when you are
logging in through the web interface of the unit for status or Call Detail
Record (CDR) information. For more information, see
Call Detail Record (CDR) Logging on page 155.
3. Enter a system password in the System Password field. It has to be a
4- to 8-character numeric password, so that you can also enter it on a
touchtone phone.
For more details on the Music on Hold and Public Address ports see
1.4 Unit back panel on page 3.
PBX Fraud and Misuse
Change the password frequently to prevent unauthorized users from
making calls through your PBX.