User guide

TALKSWITCH INSTALLATION 23
3. Now, you have the following options:
The system indicates that the update was successful and the front panel
lights stop flashing after a few seconds. When the front panel Data light is
on solid, the units are ready for network use.
1.10.4 How unit IDs affect system extension numbers
After successfully changing each unit ID to a unique number, it can be
identified by the network. More importantly, each local extension (including
addtional IP extensions), remote extension, and voice mailbox has a unique
numbering system. The second digit in the three digit identifier is the unit
ID number, up to unit 4. See the following diagram and table.
Figure 25: Examples of three-digit identifiers
Keys Result
00 Responds with the unit ID number of that particular unit.
01 Sets the unit ID to 1.
02 Sets the unit ID to 2.
03 Sets the unit ID to 3.
04 Sets the unit ID to 4.
No IP information is required to configure TalkSwitch since it does not use
the TCP/IP protocol for voice traffic over the LAN. IP configuration is
required for remote management, voicemail to e-mail notification or for
VoIP.
Unit ID 1 Unit ID 2 Unit ID 3 Unit ID 4
Local analog or
IP exte n sions
111–118 121–128131–138141–148
Additional IP
e x t e n s i o n s
151-158 161-168 171-178 181-188