User guide

12 TALKSWITCH USER GUIDE
3. Double-click the TalkSwitch icon on your desktop to open the
configuration software. The dialog box in Figure 8 is displayed.
4. Select USB from the drop-down list and click Connect... A progress bar
indicates that the configuration is being retrieved. When this process is
completed, the TalkSwitch System Configuration window opens.
See Figure 29 on page 31
Figure 10: USB connection
1.8.3 Internet connection
Select Internet from the drop-down list and click Connect... A
progress bar indicates that the configuration is being
retrieved. When this process is completed, the TalkSwitch
System Configuration window opens.
See Figure 29 on page 31.Ensure your unit is connected to a LAN with the
supplied Ethernet (CAT 5) cable. The top LED on the the back panel beside
the LAN port indicates that a connection has been established with a switch
or hub. To support remote configuration over IP, map the TCP 9393 port from
your firewall to TalkSwitch. Please refer to the manual for your router/
firewall to activate port forwarding.
1. Double-click the TalkSwitch icon on your desktop to open the
configuration software. The dialog box below is displayed.
2. From the drop-down list in the dialog box, select Internet as the
connection type.
The computer connection is only needed to change the configuration
settings. It can remain disconnected at other times.