User guide

APPENDIX A 199
Functions you can access from command mode
The list below shows the digits you can dial while in command mode from a
local extension or an outside phone.
Keys Function performed
00 TalkSwitch tell you the Unit ID of the unit you are
connected to.
0 and ID number Assigns a Unit ID (1 to 4).
30 TalkSwitch tells you which mode it is currently using.
3 and mode number Switch modes (1 or 2).
4 and auto
attendant number
Record auto attendant (1 to 9).
04 and auto
attendant number
Erase auto attendant messages (1 to 9).
5 and auto
attendant number
Play back auto attendant messages (1 to 9).
6 and message
number
Record auto call back announced messages (1 to 4).
65 Record prompted call back announced message.
06 and message
number
Erase call back announced messages (1 to 4).
065 Erase prompted call back announced message.
7 and message
number
Play back auto call back announced messages (1 to 4).
75 Play back prompted call back announced message.
90 Set to Serial connection mode (default).
91 Set to USB connection mode.
Remote extension
number, 8, and
phone number
Set a remote extension phone number.
Remote extension
number, 980, and 0
Turn off Same Line Connect for a remote extension.
Remote extension
number, 980, and 1
Turn on Same Line Connect for a remote extension.