User guide

VOIP INFORMATION 179
• For Ring extensions only, select the extensions from the list (by default
they are all selected).
• For Play auto attendant, select which auto attendant to play (for
example, 1), the number of rings to take place before the auto attendant
answers (for example, after 2 rings), and the extensions to ring before the
auto attendant answers. If you want the auto attendant to answer all
calls immediately without ringing extensions, select immediately rather
than the number of rings.
• For Go to voice mailbox, select the mailbox number (for example, 111) and
the number of rings to occur before the call goes to the voice mailbox.
5. Repeat Steps 3 and 4 for each mode.
Figure 128: Call handling
6. Repeat this process to configure the VoIP numbers 2-12.
7. For systems with multiple units, repeat the process for each TalkSwitch
unit (click on the tabs labeled TalkSwitch 1, TalkSwitch 2, TalkSwitch 3,
and TalkSwitch 4).
5.4.3.3 Assign service provider phone numbers
1. In the TalkSwitch System Configuration window, select
System Information ->VoIP Numbers.
2. Select 1 and check the Activate VoIP Number box, the default profile for
entering a phone number is the TalkSwitch Profile. Select Service Provider
Profile.