User guide

USING TALKSWITCH 135
You can set restrictions to specific hunt groups or block certain types of
outbound calls. Your extension can also be configured to access a specific
line directly.
3.3.2 Receiving calls at a local IP extension
If an auto attendant engages before you are able to pick up, the caller can
select an option at the auto attendant. The steps below apply when you pick
up an extension that is ringing.
1. Pick up the extension’s handset.
2. If the call went through the auto attendant and call screening is enabled
in Call Handling -> Local Extension and Extension Ring Groups:
a) Press to accept the call.
b) Press or hang up to re-route the call to its extension call cascade
options.
c) press Dial, Send or .
You can intercept a call that is ringing on any other local extension.
1. Pick up your handset.
2. Dial 9 and press Dial, Send or depending on your phone. This
routes the call to your local extension.
You can answer a call that is ringing at a specific extension.
1. If you know which extension is ringing, dial 7 and the extension
(i.e. 7112 to pick up a call ringing at extension 112).
2. Press Dial, Send or depending on your phone.
3. If you are in the middle of a call and want to connect to another
incoming caller, press Hold to place the first caller on hold.
4. Dial 9 or 7 and the extension.
5. To connect to the second caller, press Dial, Send or depending on
your phone.
6. Once you are finished with the second call or would like to return to the
first caller, press Cancel (softkey).
If Direct Line Access is enabled for a local IP extension, you need to
press before dialing any extensions or voice mailbox.