User guide

120 TALKSWITCH USER GUIDE
Starting RTP Port:
The starting RTP port for TalkSwitch is 6000. From this starting point,
TalkSwitch needs 4 ports for each TalkSwitch unit. RTP ports are evenly
numbered from the start port. 6000, 6002, 6004 and 6006 are needed for
the first TalkSwitch unit on a LAN and 6030, 6032, 6034 and 6036 are
used for the fourth unit.
These are the ports that this TalkSwitch system listens on — as opposed to
the port it needs to communicate with at the other end.
Example: If your IP server at another location uses port 5061 instead of
5060 for signalling, you do not set this port to 5061, you need to include the
port number in the address specified in the VoIP Configuration section of
the software.
Example: Proxy Server Name: 222.234.432.234:5061
2.7 LICENSED ADD-ONS
The Licenced Add-ons window provides functionality to enable additional
IP Extensions (up to 8 per TalkSwitch unit), enable additional voicemail
memory capacity, and allow Attendant Console to connect to the TalkSwitch
unit.
Figure 108: Licensed Add-ons