User guide
108 TALKSWITCH USER GUIDE
3. Enter the password and press to access a TalkSwitch incoming
telephone line. Each TalkSwitch unit has four password activated call
bridge accounts.
4. At this point, you can dial a number the same way as from the office.
Each account can be configured to allow access to certain hunt groups
when using call bridge.
Figure 99: Hunt group access
To activate an account, check the Activate Call
Bridge box and enter a 4- to 8-digit password.
Click the Hunt Group Access button and assign
the hunt groups for this account.
Line hunt group 80 is used for Same Line
Connect. To enable line hunt group 80, click the
checkbox next to Allow the use of Same Line
Connect [by dialing 80].
2.6 OPTIONS
2.6.1 Permissions
TalkSwitch can be configured to permit or block outgoing calls made from
specified extensions. On the restricted extensions users will be required to
enter a password (PIN code) prior to making an outside call.
For example, outgoing calls from a lobby phone can only be made by users
with assigned PIN codes.
Use the Permissions window to specify users, their PIN codes, and which
extensions restrict outgoing calls.
To configure permissions:
1. Select Options -> Permissions.
2. Check the Activate Outgoing Call Access checkbox.
3. Click the Add User button at the bottom of the window. An Add User
dialog window will appear. See Figure 101 on page 109 and Figure 102 on
page 110.