User guide

TALKSWITCH CONFIGURATION 105
Figure 96: Configuring auto call back
7. To prevent unauthorized use of your call back feature, click the checkbox
next to Use password on Call Back and enter a password.
8. Click the checkbox next to Allow Call Bridge, to allow call bridge after a
call back has been accepted. You may restrict the call bridge line access
by selecting the Hunt Group Access button. Call bridge is enabled when
call back is activated with the same password you entered at the auto
attendant.
2.5.2 Prompted call back
Prompted call back works much the same way as auto call back, except that
you can change the call back number remotely. The call back number is
stored in TalkSwitch until you change it. This means that you can change
your call back telephone number and message each time you activate call
back.
If you are travelling to a location where you do not yet know the phone
number, you can use prompted call back to save on your long-distance
charges. For details on using call back, see 3.11.2 Using call back on
page 152.
When programming the phone number remotely, for a 2-second pause,
dial 0 and for a , dial . When you have completed the
entire dial string, press .