User guide

TALKSWITCH CONFIGURATION 103
4. Accept the call by pressing . Enter your password. This confirms to
TalkSwitch that you are an authorized user and enables call access
through the TalkSwitch.
5. You will now hear a generic TalkSwitch auto attendant. You may access
your phone system as if you were in the office. Dial 9 for an outside line
and make a long-distance call using your office long-distance plan, listen
to your voicemail or transfer to a local extension.
Figure 95: Multiple calls to anywhere
2.5.1 Auto call back
The TalkSwitch call back/call bridge feature gives you access to your office-
based long-distance savings plan from
anywhere around the world.
Before call back is activated, all the call back settings must be configured. To
use auto call back, dial your office telephone number, let the call ring twice
and hang up.
You can configure four auto call back numbers.
1. Select Call Back/Call Bridge -> Auto Call Back.
2. Select Call Back 1. You can add more as needed.
3. Click the checkbox next to Activate Auto Call Back 1. In the field Number
to call back:, enter the call back number exactly as you would normally
dial the number. Do not enter a line hunt group in the dialing string.
4. Click the checkbox next to Use dialing prefix:, if you have to dial the
same prefix every time you use auto call back (i.e. long-distance calling
card number). Enter the dialing prefix including any required pauses or
feature keys like or . Use a comma to insert a 2-second pause.
Example: If you want to disable call waiting and want to dial a long-
distance prefix before dialing the long-distance number, enter the
following: *70,1010555,,. This corresponds to
70 for disabling the
call waiting feature, a 2-second pause to wait for the new dial tone,
1010555 for the long distance prefix, and a 4-second pause to wait for
the new dial tone before dialing the long-distance phone number.