User guide

92 TALKSWITCH USER GUIDE
Adjust Sequence... (button)
This section controls how the extensions will ring before the auto attendant
answers the call.
• If you have chosen the auto attendant to answer calls immediately, this
section does not require configuration and is grayed out.
• If the auto attendant is set to answer after 1 or more rings, configure
when specific extensions ring before the auto attendant answers.
• If no auto attendant is selected to answer on the specified incoming
telephone line, specify when particular extensions will ring up to 9
times. Remember that no calls go to voicemail unless you first have an
auto attendant answer.
2.4.4 VoIP Numbers
This section deals with how VoIP-enabled units handle incoming VoIP calls.
For information on VoIP-enabled numbers, please refer to Chapter 5: VoIP
Information on page 161.
1. Select a VoIP number to configure.
2. Select the mode for which you want TalkSwitch to use these settings.
If you entered the phone number in Call Handling -> VoIP Numbers, the
number will display on the corresponding button.
Figure 84: VoIP numbers