User guide

4 WWW.TALKSWITCH.COM
TS-600 USER GUIDE
3. Connect one end of the short line cord to the TalkSwitch or wall jack and
connect the other end of the short line cord to the TO LINE jack of the
cord adapter.
4. Connect one end of the long line cord to the TO PHONE jack of the cord
adapter and connect the other end to the TEL LINE jack of telephone.
Note: You must use the long cord provided with your phone.
Alternatively, the TS-600 can be powered through building wiring. See Appendix A
on page 20 for further details.
WALL MOUNTING
1. Turn the phone over so that you are looking at the bottom of the phone. Insert
tabs at the narrow end of the wall-mount bracket into the holes at the rear of
the phone bottom. Press and latch the tabs at the thicker end of the wall
bracket into holes at the front end of phone. The bracket has two round plastic
holes that can be used to hang your phone on the wallplate on your wall.
Note: If you do not wish to mount your phone on the wall, the Wall Mount
Bracket can be reversed to raise the angle of the phone’s display when sitting
on a table or desk.