User guide

WWW.TALKSWITCH.COM 3
TS-600 USER GUIDE
PART CHECKLIST
The following parts are included with your TS-600 phone:
• TS-600 telephone
• Telephone base
• Telephone handset
• Line and handset cords
INSTALLATION
Connecting the handset
Connect one end of the coiled handset cord to the handset jack on the left side
of the phone and connect the other end of the coiled handset cord to the jack
on the handset.
Connecting power directly from the AC adapter
Alternatively, you can power this phone by directly connecting the AC power
adapter to the phone.
1. Remove the rubber cap covering the DC12V plug behind the phone. It is
located beside the TEL LINE jack.
2. Connect the AC adapter plug to the DC 12V jack of the telephone.
3. After installation, lift the telephone’s handset and listen for the dial tone.
If there is no dial tone, check to make sure all cords are firmly plugged into
their jacks.
Connecting power through cord adapter
To minimize the number of wires going to the TS-600, you can use the cord
adapter to connect the AC adapter power to the telephone through the line cord.
1. Connect the AC adapter
to an electrical wall
outlet.
2. Connect the AC adapter
plug to the DC jack of
the cord adapter. The
LED is lit to indicate DC
power is available.
• Handset
• AC/DC adapter
• Cord adapter
• User Guide