User guide

WWW.TALKSWITCH.COM 21
TS-600 USER GUIDE
TROUBLESHOOTING
If you have any problems with your telephone, determine first if the problem is
with your phone or with the phone line.
RESETTING YOUR TELEPHONE’S PROGRAMMING
Electrostatic shocks or power surges (e.g., from lightning) may cause the phone
to lock up. There are two ways to reset the phone.
Basic reset
1. Disconnect the power cord from the phone.
2. Wait for 10 seconds.
3. Reconnect the power cord to the phone.
Reset to factory fefaults
If the basic reset cannot return the phone to the normal operating condition, you
must restore to factory defaults. All information stored in memory will be erased.
1. Disconnect the power cord from the phone.
2. Wait for 10 seconds.
3. Press and hold and
S when reconnecting the power cord to
the phone.
4. When firmware version number is displayed, release the buttons.
BLANK SCREEN
• Verify that your power adapter is properly connected.
• If you are using the power cord adapter, verify that it is properly connected
and that you are using the long phone cord provided with your phone.
PHONE DOESN’T RING
• Verify that the ringer is not turned off. Press the button
while the phone is idle to turn the ringer on.
• Verify that the line cord is properly connected and that dial tone is
present when going off-hook.
VOLUME UP
DELETE