User's Manual

Thermostat Programming
To enter programming mode: PRESS FAN and MODE buttons at the same time. Then press
the UP ARROW button..
The clock display will change to indicate which programming mode you’re currently in.
The display will start at 10:00. If there is ever any inactivity for more than 30 seconds the thermo-
stat will automatically return to normal operation.
Set digit up or down using up and down arrow buttons. Use HOLD button to move left one digit.
Use MODE button to move right one digit. Use MODE button to select. Selected values are
increased with the UP arrow button and decreased using the DOWN arrow button. MODE button
will save current value and return to normal operation.
When finished programming tap the HOLD button until the thermostat is back in normal operation.