User's Manual

Data Sheet: 3-Series Smart Switch (3130)

Page 1 of 3

Product Data Sheet

Dimensions

Product Overview

3130

3-Series Smart Switch

Last Updated: July 2014

The 3-Series Smart Switch gives you a new level of control for your ZigBee lighting and home automation devices.

The Smart Switch installs over existing light switches to provide wireless control of ZigBee-compatible smart bulbs

and devices without the need for any wiring. Powered by a coin cell battery, the Smart Switch can be installed

in minutes to lockout the existing switch (leaving it in an “always-on” position) and features two programmable

buttons that can be used to control on/off or dimming of lights, scenes, or any ZigBee device. The Smart Switch

can installed on nearly any surface, including existing switch plates, bare walls, cabinets, and desktops.

1x - 3-Series Smart Switch

2x - Mounting Brackets (Toggle, Rocker)

2x - Mounting Screws

• Easy-to-install mounting plate. No wiring!

• Add a light switch anywhere.

• Easy joining process.

• Over-the-air ﬁrmware updates.

• Easy compatibility with other manufacturers’

ZigBee HA 1.2 devices.

In the Box:

Key Features:

1x - CR2032 Battery

1x - Quick Start Guide

1.00”

(24.4mm)

1.64”

(41.5mm)

FRONT VIEW

SIDE VIEW

4.22”

(107.2mm)

PAGE 1
Product Data Sheet 3-Series Smart Switch 3130 Last Updated: July 2014 Product Overview The 3-Series Smart Switch gives you a new level of control for your ZigBee lighting and home automation devices. The Smart Switch installs over existing light switches to provide wireless control of ZigBee-compatible smart bulbs and devices without the need for any wiring.
PAGE 2
Use Cases • Take control of Smart Bulbs. • Add new light switch. • Create a switch for anything. Take control of Smart Bulbs. The 3-Series Smart Switch can be paired with LED smart bulbs giving users direct control at the switch. It also serves as a lockout for the existing wall switch, preventing inadvertent power disconnection to the smart bulb. Create a switch for anything. The Smart Switch works with more than just light bulbs.
PAGE 3
Compatibility The 3-Series Smart Switch features out-of-the-box compatibility with any ZigBee HA 1.2-certified hub, controller, bridge, or platform. Technical Specifications Power Rated: Battery: Battery Life: * Approvals: 3V CR2032 (1x) up to 2 years Wireless RF Protocol: TX Strength: RF Channels: Range: Environmental Operating Temperature: -20° to +70°C Shipping / Storage Temperature: -20° to 70°C Humidity Range: 0 to 90% RH. (non-condensing) ZigBee HA 1.2 +8 dBm 16 50 ft.