User's Manual

04/2010
BATTERY REPLACEMENT AND DISPOSAL
Centralite™ EMS Door Sensor
Instruction Bulletin
SPECIFICATIONS
DIMENSIONS
STANDARDS
© 2010 Centralite Systems. All Rights Reserved.
3
The Door Sensor uses a CR2 3V lithium battery No. 6206 (or equivalent). Follow
the safety precautions below and all battery manufacturers’ instructions when
replacing the battery.
FIRE OR CHEMICAL HAZARD
The Lithium batteries used in this device may present a risk of fire or chemical
burn if not handled properly.
 Do not recharge, disassemble, heat above 212 °F (100 °C), or incinerate.
 Recycle or properly dispose of used batteries.
 Replace with identical type.
 Follow all battery manufacturers' instructions.
Failure to follow these instructions can result in injury or equipment
damage.
Power 3V CR-2 Lithium Battery
Temperature range -4° F to 140°F (-20°C to +60°C)
Communications 2.4 GHz, 16 channel spread spectrum radio frequency
Component Dimensions
Magnet 2.5 x 0.32 x 0.39 in. (63.5 x 8.1 x 9.9 mm)
Door Sensor 2.5 x 0.81 x 0.86 in. (63.5 x 20.5 x 21.8 mm)
The Door Sensor complies with the following Standards:
Table 1: U.S. FCC Regulations
Standards/Regulations Title
FCC Part 15 Class B Digital Device for Home or Office Use
FCC ID: TSL-DS001
*FCC ID number appearing on the product