2014 HVAC & BUILDING MAINTENANCE RAM-PRO-XL ™ The new revolutionary chiller tube cleaner with TubeGuard™ technology WWW.GOODWAYBENELUX.
02 COIL CLEANERS & ACCESSORIES 06 COOLING TOWER CLEANERS 09 - 13 14 - 20 21 - 22 25 - 26 09 TUBE CLEANERS, FLEXIBLE SHAFTS & ACCESSORIES Chemical Descaling Machines....................................................................................... 23 ScaleBreak®, ScaleBreak-SS & ScaleBreak-PT Descaling Solutions............................
INNOVATIVE MAINTENANCE SOLUTIONS GOODWAY’S GLOBAL MARKET As the world has become smaller and smaller, Goodway’s business presence in it has become larger and larger. Today, Goodway products are in use in almost every country in the world, and on all seven continents, including Antarctica! To better serve our customers, Goodway has expanded its operation to include sales and service arms throughout North, Central and South America, Europe, the Middle and Far East, Asia, Africa and Australia.
CoilPro® High Flow Coil Cleaner IDEA L FO MICR R CLEAN IN OCHA NNEL G S FEATURES > 28 BAR at 11,4 LPM > Siphon tube to inject chemicals at 10:1 ratio > 3,7 m hose (additional 3,7 m extension hoses available) > 915 mm sectional 9,5 mm diameter stainless steel condenser wand > 460 mm wand with two nozzles (soap and flat spray) > Wide variety of custom attachments Specifications CC-400HF Motor Power: Input Power: 0.
FEATURES > Deep cycle 12 V rechargeable battery (CC-JR, CC-100 and CC-140) > Integrated water tank (CC-JR, CC-100, CC-140 and CC-600) > Integrated chemical tank (CC-JR, CC-100 CC-140 and CC-600) > Control valve to inject chemicals > Wand and custom nozzles > Wide variety of custom attachments Coil Cleaner PATENT PENDING High Flow Coil Cleaner BackPack Coil Cleaner High Flow Coil Cleaner Compact Coil Cleaner Specifications CC-JR CC-100 Specific Models Only CC-140 CC-600 COIL MAINTENANCE CoilPro
Coil Cleaner Accessories WONDER WAND SHOWN AT ACTUAL SIZE OF 9,5 mm DIAMETER The ultra thin Wonder Wand is designed to slip between the fan guard grating of condenser units, allowing you to thoroughly clean the coils from the inside, without having to remove the top of the unit. Spraying the coils in this direction, opposite to normal air flow, provides for a more thorough cleaning of the unit.
COIL MAINTENANCE Coil Cleaner Chemicals COILSHINE ® CoilShine is an environmentally friendly, biodegradable, expanding foam detergent specifically formulated for use with the CoilPro. This unique solution penetrates deep into coil beds for thorough cleaning. It is user friendly, non-acidic, and non-fuming, allowing it to be used in occupied areas and safely washed down drains.
TowerWash Cooling Tower Fill Cleaner FEATURES FEATURES > Integrated continuous duty air compressor for enhanced foam production > Custom wand extensions and nozzles > Heavy-duty, chemical resistant components and dolly > Platform to hold one standard 19 liter chemical container > Water hose connection to dilute cleaning solution or provide a clean water rinse > Hose, wand and tool holders > Heavy-duty construction > 7.
FEATURES > Stainless steel construction > Heavy-duty motor removes up to 189 liters of water and debris per minute > Semi-automatic pump primer > Adjustable flow control > In-line sediment filter > Quick connect hoses and tools > Easy storage of accessories Specific Models Only PATENTED Specifications CTV-1501 Motor Power: Input Power: 1 kW 15 Amps, 115 V, 60 Hz AC Optional: 15 Amps, 115 V, 50 Hz; 6,2 amps, 230 V, 60 Hz; or 6,2 amps, 230 V, 50 Hz 6,4 m, 14-3 GFCI 7,6 m Variable, 0-189 LPM 5 mm Sedimen
TowerVac™ Filtration System FEATURES > Reusable filters > Quick lock lids > Quick connect hoses and tools Specifications CTV-F2 Input Water Pressure: Filters: Maximum 2,1 BAR at 189 LPM Two reusable synthetic, 3,7 square meter, 5 micron media 970 mm High x 510 mm Wide x 510 mm Deep 32 kg, Net Dry Dimensions: Weight: Replacement Filters: 9703 Replacement Filter 9703-6 Replacement filters (package of six) 8
RAM-PRO™ Rotary Tube Cleaner TUBE CLEANERS Rugged and Dependable The powerful RAM-PRO handles the demanding environment of commercial contracting work like no other tube cleaner. Designed for contractors: Sturdy roll cage protects the RAM-PRO at the job site and in the back of a crowded work truck. Saves time: Quick Connect shaft attaches with a simple push – and quickly disassembles for transport. Peak on-site performance: No more slipped belts or equipment down time.
TubeGuard-XL™ Corrosion Inhibitor 1 CLEAN > Variable shaft speed > Reversible shaft rotation > Simultaneous flush of TubeGuard-XL chemical 2 DISINFECT > TubeGuard-XL tablet eliminates biofilm 3 PROTECT > TubeGuard-XL tablet prevents corrosion TubeGuard™-XL – It’s Revolutionary! A custom formulated tablet design is the best available technology for corrosion inhibition of copper and ferrous metal tubes.
RAM-PRO-XL™ Rotary Tube Cleaner TUBE CLEANERS RAM-PRO-XL – It’s A Game Changer! The RAM-PRO-XL is an innovative new tube cleaner that utilizes TubeGuard technology with a custom formulated tablet designed specifically for chiller tubes. The XL version is the more powerful big brother to the popular RAM-PRO introduced 2 years ago. The TubeGuard tablet dispenser along with variable shaft speed control and reversible shaft rotation makes it the most advanced portable tube cleaner available today.
Rotary Tube Cleaners *Manual or Mechanical Shaft Feed Tube Size Range: RAM-PRO Wet, Smooth Bore and Enhanced tubes RAM-PRO XL Wet, Smooth Bore and Enhanced tubes RAM-4 Wet, Smooth Bore and Enhanced tubes RAM-5SFVS Wet and Smooth Bore tubes (with manual or mechanical feed) 6,35 mm - 25,4 mm I.D. 6,35 mm - 25,4 mm I.D. 6,35 mm - 25,4 mm I.D. 6,35 mm - 25,4 mm I.D. (manual) RAM-6 Wet, Smooth Bore and Enhanced tubes (with 500 PSI water flush) 6,35 mm - 25,4 mm I.D. 11,09 mm - 25,4 mm I.D.
TUBE CLEANERS IRAM Wet or Dry Smooth Bore Tubes/Pipes/Hoses RAM-4X Wet or Dry Smooth Bore Tubes/Pipes/Hoses RAM-4X2A & RAM-4X Wet or Dry Smooth Bore Tubes/Pipes/Hoses AWT-100 Wet or Dry Smooth Bore Tubes/Pipes/Hoses AWT-100X Wet or Dry Smooth Bore Tubes/Pipes/Hoses Tube Size Range: 6,4 to 25,4 mm I.D. 25,4 mm I.D. and up 25,4 mm” I.D. and up 6,35 mm I.D. and up 6,35 mm I.D. and up Motor Power: 0.4 kW .735 kW 1.47 kW 1.1 kW Up to 2.
Flexible Shafts PATENTED GTC-701/GTC-702/GTC-703/GTC-704/GTC-720 WET / DRY APPLICATIONS Flexible Shafts (Nylon Casing) for Tubes 6,4 to 9,5 mm I.D.
Shaft Cutting and Crimping Press The Shaft Cutting and Crimping Press is specifically designed for use with Goodway GTC-701, GTC-702 and GTC-703 Flexible Shafts. This unique tool will allow the user to quickly cut and repair flexible shafts in the field without the use of any other tools. PCC-BASE Shaft Cutting and Crimping Press with cutting dies FLEXIBLE SHAFTS CRIMPING TOOLS FOR FLEXIBLE SHAFT REPAIR SHAFT CUTTING AND CRIMPING PRESS Note: Crimping dies not included.
Tube Cleaner Accessories CHILLER BIB® The Goodway Chiller Bib captures dirty water and debris during tube cleaning operations, saving time and money on post-job cleanup. The unit consists of a 610 mm wide x 300 mm deep reusable aluminum frame and a disposable poly bag. It features two oversized soft nylon brushes, which slide into the chiller’s tubes, to securely fasten the Chiller Bib to the tube sheet.
Got a leaky tube? Plug it with the original solution that always works, a one piece tapered brass tube plug. When installed properly tapered brass tube plugs can stay in place for years. Precision engineered, Goodway Brass Tube Plugs are ideal for a wide range of tube applications, and should be driven into the tube with a hammer just far enough to form a seal. They are manufactured in sizes to cover chiller and heat exchanger tubes 15,9 mm, 19,1 mm, 22,2 mm or 25,4 mm O.D. with BWG ranges 15 to 22.
Tube Cleaner Accessories Continued OIL FEED SIGHT GLASS OIL FEED ADJUSTMENT KNOB AIR PRESSURE GAUGE 5µm REPLACEABLE FILTER PUSH BUTTON DRAINS QUICK RELEASE FOR BOWLS AIR LUBRICATOR, FILTER AND REGULATOR Air-operated equipment will last longer and run more efficiently with proper treatment of the air supply. Note: All modules have 1⁄2" npt ports. Maximum pressure 10,3 BAR. Maximum temperature 60°C. Air displacement 238 m3/h.
BRUSHES FOR INTERNALLY ENHANCED TUBES LARGE DIAMETER OF BRUSH CLEANS GROOVES SMALL DIAMETER OF BRUSH CLEANS LANDS TURBO TIP HELPS DISLODGE DEPOSITS BRUSHES AND TOOLS Brushes and Tools 6,4 mm to 25,4 mm ENN-062-Q The “Patriot” Dual Diameter Nylon Brush for tubes 15,9 mm I.D. ENN-090-Q The “Patriot” Dual Diameter Nylon Brush for tubes 23,8 mm I.D. The”Patriot®” Dual Diameter Nylon Brush: The”Patriot” Dual Diameter Nylon Brush is recommended for removing soft deposits (mud, algae, etc.
Brushes and Tools 6,4 mm to 25,4 mm Continued BRUSHES FOR SMOOTH BORE TUBES CONTINUED 4,8 to 25,4 mm Only Brass Brushes: Brass Brushes are recommended for removing soft and light scale deposits in straight, ferrous and nonferrous tubes. Brush should be equal to or 1,6 mm smaller than tube I.D.
Accessory Application Part No. Sizes Nylon Brushes Removing soft deposits (mud, algae, etc.) in straight, ferrous and nonferrous tubes. Order brush to correspond to tube I.D. TCB-N 32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 70 mm, 76 mm, 83 mm, 89 mm, 95 mm or 102 mm Brass Brushes Removing soft and light scale deposits in straight, ferrous and nonferrous tubes. Order brush to correspond to tube I.D.
Brushes and Tools 25,4 mm and Up Continued CONE CUTTER ASSEMBLIES SINGLE CONE ASSEMBLY Cone Cutter Assemblies are designed for removing scale deposits from straight and curved, ferrous tubes. Assemblies should be slightly smaller than tube I.D. The innovative design of the cones ensures a thorough cleaning. In watertube boilers, cone cutters are the most effective cleaning tools for all conditions.
FEATURES Hands Free Scale Removal System Reverse Flow Scale Removal System Reverse Flow Scale Removal System Specifications GDS-15-PH GDS-C40 GDS-C92 Motor Power: Input Power: 0,6 kW 11 Amps, 115 V, 50/60 Hz AC Optional 5,5 Amps, 230 V, 50/60 Hz 6,4 m, 14-3 114 LPM Noryl Centrifugal Main and Positive Displacement Diaphragm Chemical 57 liters Two 4,6 m Circulation Hoses Hands Free Automatic Chemical Pump Venting Drum for Closed Systems Valves for Immersion Tank Re-circulating pH probe with 0,5 liter
Scale Removal Chemicals > DISSOLVES CALCIUM, LIME , RUST AND LITHIUM CARBONATE ON CONTACT > LOW FOAMING > LESS CORROSIVE > ECONOMICAL > BIODEGRADABLE SCALEBREAK® Goodway’s ScaleBreak safely dissolves mineral deposits faster then other liquid descalers on the market. This biodegradable cleaner will quickly dissolve calcium, lime, rust, lithium carbonate and other types of deposits from water passages in water cooled or heated equipment. It is safe for use on steel, iron, brass, copper, plastic and rubber.
HEAT EXCHANGER MAINTENANCE Tube Cleaning Drill FEATURES > Compact, rugged construction > Independent air motor and water flow controls to reduce water consumption > Push button trigger to reduce fatigue Specifications PSM-500 Drill Speed: Motor Power: 950 rpm (Free Speed) Up to 0,5 kW Depending on Air Pressure and Volume Air Requirements: Minimum 3,4 BAR at 18 m3/h Maximum 6,2 BAR at 32 m3/h Water Requirements: Minimum 2,1 BAR at 7,6 LPM, Maximum 6,9 BAR7,6 LPM Hoses: 4,6 m Air Hose and 4,6 m Water Hos
Tube Cleaning Drill Accessories Accessory Blue Nylon Brushes Application Part No. Removing soft deposits in straight, ferrous and nonferrous tubes. Brush should be equal to or 1,6 mm smaller than tube I.D. GTC-211 6,4 to 25,4 mm (in 1,6 mm increments) Brass Brushes Removing soft and light scale deposits in straight, ferrous and nonferrous tubes. Brush should be equal to or 1,6 mm smaller than tube I.D.
Professional Lights And Accessories ACCESSORIES 4.5” Pocket Light This weatherproof Top® pocket light is powered by three AAA batteries. It features 12 energy saving LED bulbs, a shock resistant metal casing, push button sealed rubber switch and carrying strap. PI-LEDLIGHT Versatile Task Light The 6” Streamlight LED flashlight offers superior brightness and a smooth beam made possible by a unique reflective optic inside the lens.
The World’s Most Popular Firetube Boiler Cleaner SAM-3 – Easy Operation You might as well be burning money if you’re allowing soot to collect in your boiler firetubes. At five times the insulating value of asbestos, just a small amount of soot can cause dramatic heat loss and substantially increase fuel consumption. Now in its 3rd generation, the SAM-3 Firetube Boiler Cleaner removes soot and scale in almost no time, enabling your system to run at optimal efficiency.
BOILER MAINTENANCE HOSE TO VACUUM Steel Brushes: Steel brushes are recommended for removing soot and light scale deposits. GTC-151 Steel Brushes for tubes 35.1 mm, 41.4 mm, 50.8 mm, 63.5 mm”, 76.2 mm, 88.9 mm or 101.6 mm O.D. FTS Scraper Tools: FTS Scraper Tools are medium action, spring loaded tools. They are used for removing light scale deposits in boiler firetubes when steel brushes do not remove all deposits. Ferrule extension required. FTS-200 Scraper Tool for tubes 50.8 mm O.D.
Package Boilers Cruiserweight Champion SAM-JR FEATURES > > > > > Preset brush travel Dual distance indicators Rear-mounted power switch Slip clutch Quick change tape system for easy maintenance of unit > Light weight > Cleans up to 4.9 m long by 50.8 mm – 63.5 mm OD tubes > Collapsing Brush Weighing in at over 9 kg lighter than the SAM-3, the SAM-JR is the cleaning system you need for small gas fired boilers, package boilers or any smaller fire tube boiler with light to moderate soot deposits.
BOILER MAINTENANCE SOOTVAC®-JR In SAM-JR’s corner collecting all that soot is SootVac-JR. Mounted on a sturdy dolly and weighing only 9 kg, lifting and portability is a breeze. Handling fine soot dust is no problem with a washable high efficiency cartridge filter protected by a 10 micron filter bag ensuring soot stays in the collection tank. Designed for gas fired or light deposits, an inner plastic bag makes collection, sealing and disposal simple.
Rotary Firetube Boiler Cleaners TubeGuard™ BLRX: While performing routine maintenance or emergency stoppage work, the waterside of fire tubes boiler systems generally remain exposed to standing water, causing corrosion to form quickly on tube walls. This quickly reduces heat transfer efficiency and overall system performance. TubeGuardBLRX sticks offer immediate treatment of water to protect tubes against corrosion. Simple and effective. Apply 4 sticks per 111.855 kW of boiler capacity.
BOILER MAINTENANCE SootVac® Soot Recovery Vacuum FEATURES Specific Models Only Specific Models Only TANGENTIAL INTAKE > Two heavy-duty motors > Exhaust muffler (only 82 dBA) > Reusable filters > Four tank sizes > 40 mm or 50 mm hoses DUAL FILTER ASSEMBLY DISPOSABLE POLYETHYLENE BAG SUCTION EQUALIZER HOLES STAINLESS STEEL 76 LITER DRUM Specifications GTC-540-20 Motor Power: Input Power: 1,7 kW 14 Amps, 115 V, 50/60 Hz AC Optional: 7 Amps, 230 V, 50/60 Hz AC 11,3 m, 14-3 1,3 m 459 m3/h 15 Microns
QuickShot® Surface Condenser Tube Cleaner FEATURES > Compact > Power assisted trigger > Automatic pressure relief system > Rugged construction Specifications QS-300 Application: Tube Size Range: Air Requirements: Water Requirements: Special Features: Smooth Bore Tubes 15,9 mm to 38 mm O.D.
FEATURES > One- or two-handed use > Rugged ABS outer shell > Air-assisted trigger > Removable aluminum shoulder stock > Compact, ergonomic design > Easily interchangeable nozzles > Clear, removable splash shield > Reliable cleared tube indicator > Flow rate up to 190 LPM > Internal vacuum break Specifications BSL-50 Application: Tube Size Range: Air Requirements: Water Requirements: Special Features: Smooth Bore Tubes 15,9 mm to 38 mm O.D.
BigShot® Surface Condenser Tube Cleaner FEATURES > Two gun pump > Comfort grip guns > Rugged construction > Up to 28 BAR Specifications BFP-3510 Application: Tube Size Range: Motor Power: Input Power: Smooth Bore Tubes 15,9 mm to 38 mm O.D.
TUBE SCRUBBERS Goodway Tube Scrubbers are the ultimate design in tube cleaning devices. They are available in sizes to fit tubes 15,9 to 32 mm O.D. When shot with a QS-300 Quick Shot Tube Cleaning Gun they provide the fastest method for removing soft deposits from tubes.
NYLON COILED BRUSHES Goodway Nylon Coiled Tube Brushes incorporate a revolutionary piston design. They feature durable nylon bristles set in a coil, wrapped around a wear resistant polymer core. Superior to wooden dowel cores, Goodway’s piston design allows the brushes to be quickly inserted into the tubes and helps maximize the cleaning effectiveness of the bristles. They are ideal for removing soft to medium deposits from condenser and component heat exchanger tubes.
POLYMER SUPER SCRUBBERS Goodway Polymer Super Scrubbers clean without scratching. These scrubbers come equipped with wear resistant polymer blades and resilient nitrile bushings. Each reusable projectile is colorcoded to size and features a patented force adjustment, preset by the factory, to match both the type of deposit and the tube material. They are designed for use with the BFP-3510 Big Shot Tube Cleaning System.
SUPER SCRAPERS Goodway Super Scrapers are virtually indestructible. They will not rust or crush under normal working conditions. They feature stainless steel blades which are precision engineered to match the internal diameter of the tube to be cleaned. This precise sizing of the blades to the tube specifications allows the scrapers to remove even the most stubborn deposits. They are ideal for hard scale, calcium, manganese and tough biological growth like zebra muscles.
Specifications JetLoad® JetLaunch® JetLaunch®-XL Air Requirements: Minimum 4,1 BAR Maximum 6,9 BAR 203 to 254 mm long (depending on nozzle) .
Pneumatic Hose / Tube Cleaning Nozzles NOZZLES FOR JETLOAD®, JETLAUNCH® AND JETLAUNCH® XL Nozzles: Nozzles are available for cleaning any tube, pipe or hose 4.76 - 50 mm I.D. Hose nozzles are tapered to fit inside the ends of hoses. Tube nozzles are designed to butt up against the ends of tubes and pipes for complete end to end cleaning. JIC nozzles are available for thorough cleaning of hoses with attached couplings. Note: Custom nozzles available.
PROJECTILES FOR JETLOAD®, JETLAUNCH® AND JETLAUNCH® XL Standard Projectiles: Goodway’s Standard Projectiles are specially formulated for use with any pneumatic gun. As a projectile is shot, it is compressed, loosening and propelling dirt and deposits through the hose, tube or pipe. Projectiles are oversized to ensure proper compression for maximum cleaning action. Note: Abrasive projectiles and custom sizes available.
Video Inspection Scopes > FLEXIBLE PROBE LESS THAN 10,2 mm DIAMETER VS-W-30 VS-S-10 Specifications Power: Running Time: Illumination: Focal Length: Field of View: Viewing Direction: Minimum Radius: Image Transfer: Resolution: Interface: Still Image Recording Format: Video Recording Format: Operating Temperature: Dimensions: Weight: 44 VS-S-10 VS-W-30 3,7 V, rechargeable li-polymer battery 3,7 V, rechargeable li-polymer battery 4 hours 4 hours 6 LED’s 6 LED’s 10 mm – 50 mm 10 mm – 50 mm 53° 53° 0° or
FEATURES > Visible pressure gauges > Rugged construction > Multiple seal sizes > Quick connect fittings > Compact Specifications LD-2X2 Tube Size Range: Air Requirements: Dimensions: Weight: 19,1 to 25,4 mm I.D. Maximum 6,9 BAR at 25 m3/h 230 mm High x 265 mm Wide x 70 mm Deep 0,9 kg (Per Gun) TESTING EQUIPMENT Tube Leak Detector Seal Kits: LDW-075 Seal Kit with two seals for tubes 19,1 mm O.D., 16 to 18 gauge and two seals for tubes 19,1 mm O.D.
Stack Efficiency Tester > NOx TESTER AVAILABLE FEATURES > Automatic calibration > Real time display of measurements and calculations > Optional printer SET-200 Stack Efficiency Tester, including protective rubber boot, testing probe and carrying case SET-200P Same as SET-200 except with printer Specifications SET-200 Flue Temperature Measurement: Resolution 0,6°C, Accuracy ± 2,8°C Range 0° to 600°C Resolution 0,1%, Accuracy ± 0,2%, Range 0 to 21% Resolution 1ppm, Accuracy ± 10ppm < 100ppm ± 0,5% Range
HVAC MAINTENANCE Rotary Duct Cleaner FEATURES > Stainless steel construction > Speed control to set shaft rotation to optimum speed for each application > Reversible shaft rotation > Interchangeable cleaning tools > Integrated dolly > Simultaneous vacuum > Belt switch activation Specifications AQR-1500 Motor Power: Input Power: 0,7 kW 6 Amps, 115 V, 60 Hz AC Optional 6 Amps, 115 V, 50 Hz; 3 Amps, 230 V, 60 Hz; or 3 Amps, 230 V, 50 Hz 6,5 m, 14-3 GFCI • Variable/Reversible 1.
Duct Vacuum FEATURES > Two speed motor > Large HEPA filter > Pressure gauge to monitor HEPA filter > Large wheels > 300 mm hose Note: A dust mask and safety goggles must be worn when operating this equipment – see page 43.
HVAC MAINTENANCE Duct Vacuum AQ-RV450 Powerful two stage vacuum, remote control, twin HEPA cartridge filters and clever modular design make this versatile air vent cleaning system a no-brainer for any job. The AQ-RV450 can be used as a roll anywhere self contained air vent cleaning system or the light weight modular power pack can be detached from the carrier and placed right next to the job.
Flexible Shafts, Brushes and Accessories Flexible Shafts (Nylon Casing): For removing light to medium deposits in horizontal ducts up to 457.2 mm I.D. GTC-704-12-C Flexible Shaft, 3.65 m GTC-704-17-C Flexible Shaft, 5.18 m GTC-704-C FAN BRUSH Fan Brush: The fan brush is recommended for removing debris in round, rectangular and square ducts. It both loosens and propels deposits down the duct towards the vacuum FDB-212 Fan Brush, 203.2 mm - 457.2 mm GTC-704-25-C Flexible Shaft, 7.
HVAC MAINTENANCE Flexible Shafts, Brushes and Accessories FOGGER Hole Cutter: Fogger: AQ-HC100R Replacement Bit Note: 230 V unit available – call for price. Spin Doors: FreshDuct: This accessory is designed for use with any standard power drill to cut a circular hole in a duct. AQ-HC100 Hole Cutter These insulated doors quickly mount to holes made in ducts. Three latches hold each door securely closed. Select sizes to match the appropriate vacuum hose diameter.
Commercial Vacuum Cleaners DV-SV Stationary Dry Continuous Duty Vacuum DV-CD Industrial Dry Continuous Duty Vacuum VAC-2-HEPA Industrial Wet/Dry HEPA Vacuum DV-E3 Triple Motor Wet/Dry Vacuum VAC-CRV Clean Room Dry ULPA Vacuum Motor(s): Single Single Twin Triple Single Motor Power: 1.7 kW 2.6 kW 2 kW (Total) 3.4 kW (total) .
Commercial Vacuum Cleaners VACUUM CLEANERS DV-EX115H & DV-AV9-EX Explosion Proof HEPA Vacuum DV-AV-EP Explosion Proof Vacuum DV-CM ChipMaster® Vacuum with Pump-Out AV-1200-15SS Air Powered Wet/Dry Vacuum GTC-540-20SS Heavy-Duty Soot/Powder Vacuum • • Triple • Twin Motor Power: 1.27 kW • 3.4 kW (total) • 1.7 kW (Total) Input Power: Standard: 11 amps, 115 V, 60 Hz AC • Standard: 13 amps, 230 V, 50/60 Hz AC Optional: 22.5 amps, 115 V, 50/60 Hz • Standard: 14 amps, 115 V, 50/60 Hz AC 9.
Triple Motors For High Lift And High Flow VAC-3A Do you have a heavy duty mess that other vacuums aren’t quite up to? Three motors in the VAC-3A generate 1676 mm of static water lift while moving 245 CFM of air. That translates into high velocity cleaning of large volumes of dirt, debris and liquids pulled from your shop floor in seconds. You also get a choice of 56.8, 113.5 or 208.2 liter tank capacity for carting off the really tough jobs.
PRESSURE WASHER GPW-1300 This GPW-1300 heavy-duty pressure washer delivers tons of features to make you more productive. One look at this rugged pressure washer and you can see that it’s been engineered to please even in tough environments. Five spray nozzles with rack storage, 7.62 meter of flexible spray hose neatly wrapped around its on-board hose reel, a rugged dolly and 1,300-PSI of pressure allow you to tackle a variety of cleaning tasks. GPW-1300-60 Heavy-Duty pressure washer including 7.
Mold Remediation Mold RemediationEquipment Equipment MP-50 The MP-50 MoldPro™ Sprayer provides an easy, convenient method for applying MoldTek chemicals. The unit features a 12 V DC rechargeable battery and large 19 liter spray tank for remote operations.
MOLD REMEDIATION Mold Remediation Chemicals MOLDTEK™, MOLDTEK-XC AND MOLDTEK-MT Mold and mildew are not only unsightly and unpleasant to smell. They are also a serious health concern for you, your staff and your tenants. Remove and prevent mold and mildew with these proven and effective MoldTek formulations. MoldTek is fast – it's pre-mixed and ready to use. MoldTek-XC is a concentrate – perfect for big jobs or where storage is at a premium. MoldTek-MT inhibits future mold growth.
® What’s Inside... METRIC TO U.S.
