Specifications
99
Semi-Automatic Controller 97102
The Semi-Automatic Controller has been designed for precision programming of dispense time and dispense pressure
setting; product is dispensed from a separately positioned container. Together with the digital pressure display, a
digital timer ranging from 0.04 to 99.9 seconds allows the operator to make pin-point accurate deposits when
applying a wide range of fl uids from low to high viscosity.
The Semi-Automatic Controller 97102 controls the dispensing pressure in the product reservoir and the pneumatic
opening of the dispensing valve according to the selected dispensing time. The start signal for dispensing is provided
by an external foot switch or fi nger switch. Error messages are shown on a digital display and are accompanied by
an audible alarm. A voltage-free Ready signal is provided as long as no fault condition exists and when the dispensing
cycle is completed.
Technical Specifi cations:
Power Supply 90-260 VAC; 47-63 Hz Air Output 0.1-7 bar (1-100 psi)
Power Consumption 40W Dimensions (W x H x D) 145 x 230 x 260mm
Air Input 2-12 bar (30-175 psi),
fi ltered to a maximum of 10µm
Weight 2.8 kg
Features:
• Fitted with precision pressure
regulator eliminating air pressure
fl uctuations
• Digital pressure readout with
electronic monitoring
• Continuous or timed operation
modes
Automatic Controller 97152
A versatile multi-functional controller for actuating 1-2 dispensing valves as well as appropriate peripheral
equipment such as reservoir, advancing slide, rotor spray, online fl ow monitor, etc.
The process functions and data are laid out clearly on a graphic display. Settings can be made via the membrane
keypad and the rotary selector switch.
The amount of product dispensed is determined by the pressure in the reservoir, the length of time the dispensing
valve remains open and the nozzle size. Reservoir pressure is controlled via precision pressure regulator and
monitored electronically. The dispensing parameters can be PIN secured against manipulation. The controller can be
integrated into fully automated assembly line operations using its PLC interface, relieving the higher-ranking control
system from the time-critical and resource intensive tasks related to dispensing control and monitoring. It is possible
to query data records via a serial PC interface for documentation, maintenance or quality assurance, etc.
The system has an integrated pneumatic solenoid valve module for single channel operation. As an additional option,
an external solenoid valve module 97204 may be connected to upgrade the unit for dual channel dispensing.
The controller can be used for evaluating data from either the pressure based or the calorimetric fl ow monitor.
Error messages are shown on the display and, in the case of major faults, signalled with an audible alarm. In addition,
fault and ready signals are provided as voltage-free electrical signals.
Technical Specifi cations:
Power Supply 90-260 VAC; 47-63 Hz Dimensions (W x H x D) 145 x 230 x 260mm
Air Input 2-10 bar, filtered to max. 10µm Air Output 0.1-7 bar
Power Consumption 60W Weight 3.9kg
Features:
• 1-2 independent dispensing
channels
• Integrated solenoid valve module
• Fitted with precision pressure
regulator eliminating air pressure
fl uctuations
• Digital pressure readout with
electronic monitoring
• PLC interface
• Graphic display for indication of
dispensing parameters and pressure
profi le of the online fl ow monitor
• Online fl ow monitor signal
evaluation