Specifications

66
Integrated Manual Dispenser 97003/97004
Technical Specifi cations:
Air Input max. 8 bar (116 psi),
fi ltered to a maximum of 50µm
Max. distance from system
to dispensing point
2m
Air Output 97003: 0.05-0.7 bar (1-10 psi)
97004: 0.3-7 bar (4-100 psi)
Dimensions (W x H x D): 360 x 335 x 235mm
Weight 6.5kg
Selector Chart:
System
Viscosity Range (mPas)
Item # IDH No.
Integrated Manual Dispenser 0-1500 97003 135546
1000-10000 97004 135547
Hand-held applicator 0-1000 97131 194420
500-5000 97111 88642
Features:
• Eliminates waste and reduces
operator fatigue
• Easy to read pressure gauge
• Adjustable pressure regulator
The Manual Dispenser Controller in combination with the Vari-Drop
TM
applicator (97131) has been designed for
applying beads, for potting and for “by-eye” deposits. These dispensing systems are reliable, low cost pneumatic
systems for dispensing fl uids. Each system includes a 2 litre pressure reservoir that is designed for use
with a hand-held applicator. These units have 0.05-0.7 bar (1-10 psi) (97003) or 0.3-7 bar (4-100 psi) (97004)
pressure regulators, suitable for low viscosity (<1500mPas) and high viscosity (>1500mPas) fl uids, respectively.
The reservoirs accommodate all Loctite
®
bottles in 250ml, 500 g, 1 litre, and 2 kg packages.
Operation of this unit is easy. The operator will place a bottle of product in the reservoir and tighten the three handles
on the lid. The unit is then pressurised to the appropriate setting for optimal fl ow control. The product is dispensed
through a hand-held applicator. The amount dispensed can be set by adjusting the fl ow screw on the fi nger switch
or adjusting pressure.
Typical Fluids Handled: Cyanoacrylate adhesives, light curable adhesives and anaerobic adhesives.