Specifications

4444
UVALOC 1000 chamber / tunnel version 97055/97056
UVALOC 1000 is a high-performance modular light curing system, designed for integration into automated production
lines or used as a bench top system, for curing UV adhesives and sealants. Both systems have a parabolic refl ector and
a pneumatic shutter system. The controller module is programmable and includes a display. A drawer is provided in the
lamp housing for replacement of the plug-in bulb.
Both systems are equipped with a standard 1000W medium pressure pure mercury vapour lamp for combined
tack-free and in depth curing. Depending on the type of bulb selected, the expected service life is between 700 and
1200 hours. Optional bulbs are Gallium doped mercury lamps, designed to emit mainly light in the visible spectrum
(380nm-780nm), and Fe-doped mercury lamps to emit high intensity UVA light (315nm-380nm). The pure mercury
vapour bulb has higher UVC emission (210nm-280nm) for acceleration of surface cure, but less UVA for depth cure.
A pneumatically operated shutter ensures that the UV bulb is effectively shielded during part loading or unloading,
eliminating any danger to operators.
The chamber version (97055) has a fully interlocked access door that prevents opening during the UV exposure cycle.
The door of the cure chamber is made of UV blocking, tinted polycarbonate to allow monitoring of the process during
the exposure cycle.
The tunnel version is designed to be installed above an existing conveyor or workstation. It has a PLC interface to enable
synchronisation of UV exposure, shutter opening and component conveyor operation.
Technical Specifi cations:
UV Emission Spectrum 200-550nm dependent
on bulb type
Weight: Controller 13kg
Dimensions
(W x H x D):
Controller:
305 x 170 x 490mm
Cure chamber with lamp
housing: approx. 12kg
Cure chamber with lamp
housing: 305 x 575 x 525mm
Dimensions
(W x H x D):
Cure chamber
internal dimensions:
235 x 307 x 350mm
Power Supply 230 VAC, 50Hz Power Consumption approx. 1200W
Pneumatic supply 4-6 bar (60-90psi)
Selector Chart – UV Bulb
Item # IDH No.
UVA bulb (Fe-doped) 97347 870097
UVC standard bulb (pure mercury) 97346 870098
UV Visible light bulb (Ga-doped) 97348 870096
Features:
• Repeatable and precise curing
results due to adjustable opening
times of the shutter
• Provides capability for tack-free
cure of UV adhesives
• Effectively shielded UV lamp
• High degree of occupational
safety
• Integrated UV monitoring system
• Emergency stop button
UVALOC 400 / IndigoCure Lamp 97039/97063
The UVALOC 400 is suitable for UVA and UVV light curing Loctite
®
adhesives. Both versions are ideal for manual
workstations, workshops and labs. They include a base with an integrated power unit and a lamp housing mounted
to an adjustable post that enables lamp height to be set to suit the components. Available with optional UV protection
enclosure. These light curing systems are designed for applications permitting manual loading. Exposure time depends
on the application and must be controlled by the operator. Expected UV bulb life is approx. 1000 hours. The IndigoCure
System 97063 has an additional special glass fi lter that completely blocks UV radiation.
Technical Specifi cations:
Power Supply 230VAC ±4%, 50 Hz UV Lamp Warm-up Time 3 min.
Power Consumption approx. 450W Lamp lifetime approx. 1000 hours
Intensity 80mW/cm
2
Lamp Type 400W High intensity metal
halide bulb
Weight 11.5kg Dimensions (W x H x D) 220 x 472 x 300mm
Emission Spectrum 97039: 300-450nm with standard bulb 97063: 400-500nm
Bulb Selector Chart:
Item # IDH No. Item # IDH No.
UVA bulb 400W 97246 135562 Indigo bulb 400W 8953565 1284685
Features:
• 400 W Metal halide bulb
• Optimised to emit UVA light
(97039) or Indigo light (97063)
• Typical curing area of 80 x 120mm
• Approx. 1000 hours of expected
UV bulb life
• Adjustable lamp height
• Contains a glass fi lter to prevent
exposure to UVB/UVC light