Specifications

37
200ml Dual Cartridge Manual Applicator 96003
The Loctite
®
200ml Dual Cartridge Applicator is a hand-held, manually operated dispenser. This dispenser provides a
convenient, cost-effective method to apply product. The applicator is suitable for 1:1 and 2:1 mix ratio products.
Typical Fluids Handled:
Loctite
®
2-component adhesives packaged in 200ml twin cartridges.
400ml Dual Cartridge Manual Applicator 983438
The Loctite
®
400ml Dual Cartridge Applicator is a hand-held, manually operated dispenser. This dispenser provides
a convenient, cost-effective method to apply product. The applicator is suitable for 1:1 and 2:1 mix ratio products.
A conversion kit for 4:1 ratio is available 984211 (IDH No. 478553).
Typical Fluids Handled:
Loctite
®
2-component adhesives packaged in 400ml twin cartridges.
400ml Dual Cartridge Pneumatic Applicator 983439
The Loctite
®
400ml Dual Cartridge Pneumatic Applicator is a hand-held, pneumatically operated dispenser.
This dispenser provides a convenient, cost-effective method to apply product and eliminates hand fatigue.
The dispensing rate is adjusted via the integrated pressure regulator. The applicator is suitable for 1:1 and 2:1 mix
ratio products. A conversion kit for 4:1 ratio is available 984210 (IDH No. 478552).
Typical Fluids Handled:
Loctite
®
2-component adhesives packaged in 400ml twin cartridges.
Technical Specifi cations:
Air Input max. 8 bar (125 psi), fi ltered to a maximum of 30µm
490ml version for 10:1 products 985249 (IDH No. 470572).
200ml Dual Cartridge Pneumatic Dispenser 983437
The Loctite
®
200ml Dual Cartridge Pneumatic Applicator is a hand-held, pneumatically operated dispenser.
This dispenser provides a convenient, cost-effective method to apply product and eliminates hand fatigue.
The dispensing rate is adjusted via the integrated pressure regulator. The applicator is suitable for 1:1 and 2:1 mix ratio
products.
Typical Fluids Handled:
Loctite
®
2-component adhesives packaged in 200ml twin cartridges.
Technical Specifi cations:
Air Input max. 8 bar (125 psi), fi ltered to a maximum of 30µm
900ml Dual Cartridge Pneumatic Dispenser 97048
The Spray Gun is used for air assisted application of Loctite
®
7255 from 2:1 cartridges.
While the product is being mixed and extruded via a static mixer, a simultaneous fl ow of atomizing air is supplied;
a spray nozzle is attached to produce a uniform spray pattern.
Technical Specifi cations:
Air Input max. 8 bar (125 psi), fi ltered to a maximum of 30µm
Features:
• Control pressure separately adjustable for advancing cylinder and atomizing air.
• A hand lever valve is provided for turning the atomising air supply to the spray nozzle on and off.