Specifications

36
50ml Dual Cartridge Pneumatic Dispenser 97042
The Loctite
®
50ml Dual Cartridge Applicator is a hand-held, pneumatically operated dispenser. This dispenser provides
a convenient, cost-effective method to apply product and eliminates hand fatigue. The dispensed amount is adjusted
via the integrated pressure regulator. The applicator is available for 1:1 and 2:1 mix ratio products. A plunger adapter for
processing 37ml dual cartridges is enclosed for quick and easy change-over.
Typical Fluids Handled:
Loctite
®
2-component adhesives packaged in 50ml twin cartridges.
Technical Specifi cations:
Air Input max. 8 bar (125 psi), fi ltered to a maximum of 30µm
2 x 300ml Cartridge Pneumatic Dispenser 1911001
The Loctite
®
2 x 300ml Dual Cartridge Applicator is a hand-held dispenser. It allows parallel dispensing of the two parts
of products Loctite
®
3295 and 341, mixed in a ratio of 1:1 through a static mixer nozzle.
The pneumatic applicator has an integrated regulator for air pressure adjustment. Pressure is relieved automatically
when the gun trigger is released, to minimise run-on effect.
Typical Fluids Handled:
Loctite
®
3295 A/B, 341 A/B.
Technical Specifi cations:
Air Input max. 8 bar (125 psi), fi ltered to a maximum of 30 µm
50ml Dual Cartridge Manual Applicator, 1:1 / 2:1 96001
The Loctite
®
50ml Dual Cartridge Applicator is a hand-held, manually operated dispenser. This dispenser provides a
convenient, cost-effective method to apply product. It is used for 1:1 and 2:1 mix ratio products.
Typical Fluids Handled:
Loctite
®
2-component epoxies and acrylics packaged in 50ml twin cartridges/syringes.
50ml Dual Cartridge Manual Applicator, 10:1 S cartridge design 1034026
The Loctite
®
Dual Cartridge Manual Applicator is a hand held unit; it is made of impact resistant plastic and provides a
convenient, cost-effective method to apply product.
Typical Fluid Handled:
Loctite
®
3038 Polyolefi n Bonder.
Hand-Held Applicators for Two Component Dispensing