Specifications

30
Features:
• Precision dispensing of
2-component acrylics and epoxies
• High repetition accuracy
• Numerous types and sizes of
mixers available to suit different
types of products and applications
• Tubing adapters for optimum
separate assembly of
mixing nozzle
Mixing ratio:
Item # IDH No.
1:1 97640 (Acrylic) 451896
1:1 97061 (Epoxy) 727063
2:1 97062 (Epoxy) 727062
Volumetric Mix Dispenser 97640
The Mix Dispenser is suitable for precise volumetric application of 2-component acrylic and epoxy products
(up to 50,000 mPas). It is a compact design for integration into automatic work stations and robotic applications.
Mixing ratios of 1:1 and 2:1 are available. A very precise amount of product can be dispensed with very high repetition
accuracy. The maximum dispensing volume is 10ml. Various types and sizes of mixers are available to suit different
types of products and applications. Heater 97534 may be used for heating the dispensing head whenever high viscosity
products are processed.
Synchronous dispensing is controlled by means of a DC drive with ball-screw transmission. Inlet and outlet valves are
driven by pneumatic actuation. A control module with LED display, serial RS 232 and PLC interface are also integrated
into the unit.
To prevent negative pressure and resulting entrapment of air bubbles, product pressure from a reservoir is applied to
fi ll the product chambers simultaneously with product parts A and B. Dispensing volume and fl ow rate can be adjusted.
A static mixer is connected for product mixing and dispensing.
Technical Specifi cations:
Power Supply 24 VDC Power Consumption 84W
Air Input min. 5-max. 8 bar (73-116 psi) required, fi ltered to a maximum of 10µm
Dispensing System Piston pump Mixing System static
Product Pressure 3 bar (44 psi) required Repetition Accuracy ±3%
Dimensions (W x H x D) 152 x 190.5 x 140mm Weight,
applicator assembly
approx. 3.0kg
Static Mixer Size Item # IDH No. Static Mixer Size Item # IDH No.
Blue (12 elements) 3.2mm 97285 697033 Green (16 elements) 6.5mm 97289 496665
Blue (16 elements) 3.2mm 97286 446903 Pink (20 elements) 5.4mm 97502 486497
Yellow (16 elements) 4.2mm 97287 446902 Green (20 elements) 6.5mm 97503 486499
Approved Loctite
®
products:
Acrylics: 3250, 3252, 3255, 3271, 3292 Epoxies: 3421, 3422, 3430, 9455, 9466, 9483, 9489
Benchtop Peristaltic Dispenser 98548
The peristaltic motion of the rotor provides volumetric dispensing of the material directly from a bottle or similar
container and does not require the use of an air source. This dispenser completely empties the product container,
eliminating waste and avoiding spilling. The Benchtop Peristaltic Dispenser provides precise volumetric dispensing of
single component cyanoacrylates, UV and anaerobic adhesives, solvent-free activators and oils (up to a viscosity of
approx. 5,000 mPas). The unit is designed mainly for manual work stations but can also be integrated into automatic
production lines. A precise amount of product can be set and high repetition accuracy is ensured. Four feedline size
options are available. Black tubing must be selected for UV-curable adhesives.
The Benchtop Peristaltic Dispenser is a volumetric system driven by a stepper motor. An electronic motor control unit
with 9-pin I/O connector for an optional foot switch or communication with a PLC is integrated into the system.
The unit provides digital dispense timing control, continuous flow rate adjustment and adjustment of suck-back.
Technical Specifi cations:
Power Supply 100-240 V AC, 50/60 Hz Power Consumption 10W
Dimensions (W x H x D) 192 x 210 x 90mm Weight, applicator
assembly
approx. 3.0kg
Repetition Accuracy ±10%
Selector Chart: Item # IDH No.
Bottle stand for 20g/50ml Loctite
®
bottles 98501 756316
Controller 98548 769914
Features:
• Precision dispensing of low
viscosity materials directly
from the original bottle
• Does not require the use of
an air source
• High repetition accuracy,
unaffected by temperature
variations
• Manual or time-controlled
dispensing modes, variable
dispensing rate and adjustable
suck-back
• Range of clear and black
feedline size options available
• Easy clean-up and product
change-over